Richard Mille RM 50-04 Kimi Räikkönen
Richard Mille swiss integrates partners with Alfa Romeo Racing in 2018, and is coming to the F1 track this year. The Singapore Grand Prix has just been completed yesterday, I believe that the racing is inevitable; but we have written the table, of course, more concerned about the watch on the mobile phone, and this time I want to report is the Alfa Romeo Racing rider Kimi Räikkönen wear new RM 50-04 Kimi Räikkönen played.
Richard Mille RM 50-04 Kimi Räikkönen belongs to the RM 50 series, with two seconds pursuit timing function and a gyro system. RM 50-01 is a watch made by Richard Mille in 2014 for Lotus F1 Team. It then creates RM 50-02 and RM 50-03, respectively, and we also evaluated Richard Mille RM 50 in 2017. -03 McLAREN F1, if you are interested, you can read it. This year, the latest RM 50-04 Kimi Räikkönen is designed to be close to RM 50-03, but it is interpretable with different materials and tones. The red white color is just echoing Alfa Romeo Racing on the 2019 season new car C38 colour.
RM 50-04 Kimi Räikkönen implements Richard Mille iconic laminated case, 44.5 x 49.65 mm, thick 16.1 mm, lining red strap. The bottom cover and the lap are made in white quartz TPT, and there is a laying case in black Carbon TPT. The TPT in these two material names represents North Thin Ply Technology (NTPT), meaning that the quartz TPT and Carbon TPT are two materials, but are made in the same technique. White Quartz TPT was stacked by 600 layers of dioxide, immersed in a white resin, and heated by high pressure to 120 ° C, while Carbon TPT was made of multilayer black carbon fiber.
The wholesale watch is designed with an open dial, with a black titanium metal scale frame, and with a red modified endovo, sub-plate, hour scale, power storage and function mode. This work is only used in 7 o’clock, because it is the car number of Kimi participating, and there is a word “RM50-04 Kimi” in 8:00.
The rm 50-03 movement in the end of the dial frame, is amazing is that the weight is only seven grams, which is of course the power of the material. The bottom plate and bridges of the movement are made of five-stage titanium alloys, and some bridges are made in Carbon TPT, including the bridges dedicated to the pursuit of the needle timing system, support the outer frame of the entire movement structure, and to stabilize hair The drum and the horizontal frame of the gyro bridge, etc. Although it is light, the whole movement is extremely strong and successfully passed up to 5000 g of impact testing.
In terms of function, the watch uses a tether wheel escapement system, and the time, minute, small second display, with a double second pursuit timing function, controlled by the guide post wheel timing system, pressing the button on the side of the shell to start Or stop meter, 4-point buttons are used to control the pursuit, and the button of the 10-point button can return to zero.
The movement of the movement is about 70 hours, and the display is displayed in the dial 11 at the time of the display. It is the torque indicator, which represents the tension of the primary clock, and the pointer indicates that the 1,53 Nmm or less is too slack, exceeding 65 NMM is too tight, which shows the greatest advantage to prevent over-strip of the desert. As most of the buy Richard Mille watch, this work also has a crown mode display. After the desert is pulled out of the crown, there is no need to estimate the championship in that gear, because the display of 3 hours will clearly mark it. Is it in the upper, the campus or the neutral mode.
